RW-1500
RW-1700
RW-2000
ACCESSORIES
APPLICATION & SETUP PICTURES
UNITED STATES
EUROPE
ASIA

We offer two models of Nozzle Welders. All models come with the same standard rise & fall cam action, amp meters, torch angle adjustors, flux hopper w/gate valve, heavy-duty horizontal/vertical adjustments, wire reel assembly, and solid-state rotation controls that provide clockwise/counterclockwise rotation. The machines are designed to be used with either Flux Core or Sub Arc welding procedures. The differences in the models are in welding diameter, accepted wire size, and rating amps.

 

The welding control functions include:
  • Auto weld switch
  • Wire direction switch
  • Cold wire inch
  • Purge switch
  • Pre flow
  • Post flow
  • Burn back

 

 

 

 Model# RW-1500 (Nozzle Welder)

 

  • Welding Diameter: 1"-18"(25 to 457mm)
  • Wire Size: .035-5/64"(.8 to 2.0mm) on 12" spools
  • Rating Amps: 500 amps,100% duty cycle
 

   

 

 

TOP OF PAGE
pdficon.gif (426 bytes)        Brochure
 

 Model# RW-1700 (Nozzle Welder)

 

  • Welding Diameter: 10”-50”(250 to 1270mm)
  • Wire Size: .035-3/32” on 60 lbs coils
  • Rating Amps: 500 amps, 100% duty cycle
  • Designed for multi-pass welding of nozzles in vessels, domed heads or flat surfaces

  Options:

  • Horizontal & vertical arms may be motorized
  • Oscillator
 

   

 

 

TOP OF PAGE
pdficon.gif (426 bytes)        Brochure
 

 Model# RW-2000 (Nozzle Welder)

 

  • Welding Diameter: 10”-50”(250 to 1270mm)
  • Wire Size: 1/16-5/32”(1.6 to 4.0mm) on 60 lbs coils
  • Rating Amps: 700 amps, 100% duty cycle
 

 

 

 

TOP OF PAGE
pdficon.gif (426 bytes)        Brochure
 

3 - JAW SPIDER CHUCK

The 3-jaw spider chucks are design for use with Nozzle Welders RW-1500 and RW-2000 to help eliminate set up time by automatically centering the Nozzle Welder on the nozzle. By simply dropping the chuck into the nozzle, expanding the arms out, bolting the machine to the chuck, and then timing the cam you are ready to weld. There are three 3-Jaw Spider Chuck models available.

 

 Model# EC-816
  • 8 to 16 3-Jaw Spider Chuck for nozzle ids 8" to 16"
 Model# EC-1024
  • 10 to 24 3-Jaw Spider Chuck for nozzle ids 10" to 24"
"
 Model# EC-2442
  • 24 to 42 3-Jaw Spider Chuck for nozzle ids 10" to 42"
 

 

 

 

TOP OF PAGE
CWI Footer Page